REMANUFACTURED EQUIPMENT
2022 SSR Caterpillar D11R’s
Cat D11R Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild program in the world. Read the Details:
2022 SSR Caterpillar D10T’s
Caterpillar D10T Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild program in the world. Read the Details:
2022 SSR Caterpillar D9T’s
Caterpillar D9T Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild program in the world. Read the Details:
CRAWLER TRACTORS
2016 Cat D11T, CPT Rebuild, Crawler Tractor, A03000
$1,485,0002016 Cat D11T, Zero Hour Cat Certified Powertrain Rebuild w/ 4 year, 6,000 hour factory Cat warranty. U Blade, Single Shank Ripper, 100% New UC, Machine with excellent history and is straight and clean as they come. Down payment Holds machine, Available Summer 2022. Read the Details:
2002 Cat D11R, Crawler Tractor, A02643
$185,0002002 Cat D11R, 7PZ00533, series, Runs and Operates to spec, U Blade, Ripper. Could use paint, otherwise very straight tractor from good home. Read the Details:
2006 Cat D10T, Powertrain Plus Rebuild, A02741
$988,0002006 Cat D10T, RJG00720, Zero Hour Bare Frame Rebuild with available 4 year, 8,000 hour Warranty. Read the detailed description on our documented and detailed process below. New Undercarriage, Single Shank Ripper, U Blade. This tractor in process now, 20% down payment holds for buyer until finished. Read the Details:
2019 Cat D6T LGP, VPAT, A03059
$348,0002019 Cat D6T LGP, VPAT, 3,775 Hours, Rear ripper, ARO Accugrade GPS Ready, Good UC. Machine is clean, original and as nice as they come. Rent or Buy. Read the Details:
2011 Cat D6T XW, VPAT, A03063
$288,0002011 Cat D6T XW, VPAT, 4,580 total hours, 1,930 Neutral hours, 2,650 Actual “working” hours. ARO Accugrade GPS Ready, Good Undercarriage. Machine is good, clean & original with documented service history & oil samples. Rent or Buy. Read the Details:
2015 Cat D11T, CPT Rebuild, Crawler Tractor, A02973
2015 Cat D11T, Zero Hour Cat Certified Powertrain Rebuild w/ 4 year, 6,000 hour factory Cat warranty. U Blade, Single Shank Ripper, Good UC, Machine with excellent history and is straight and clean as they come. Available and Ready Now! Read the Details:
2012 Cat D10T, Crawler Tractor, A03012
2012 Cat D10T, 5,500 hours since Cat Certified Component Rebuild in 2020, the nicest D10T we have ever had on trade, 95% plus UC, U Blade, Multi Shank Ripper, Documented History, Reputation Machine, Clean as they come. Read the Details:
2007 Cat D8T Powertrain Plus Rebuild, A02706
2007 Cat D8T. Zero Hour Powertrain, w/ 3 Year, 5,000 Hour OEM Cat warranty. 100% New Cat Undercarriage, Pre emissions, SU Blade, Multi Shank Ripper, Diff Steer, Full recondition. Read the Details:
2019 Cat D6 XE, LGP, VPAT, Next Gen Crawler Tractor, A03017
2019 Cat D6 XE, LGP, Next Gen Electric Drive, 1,145 hours, Warranty remaining until July 2025 or 6,000 hours, 3D Grade with assist, GPS Ready, Rear Winch, Machine is good as they come, 1 Owner operator. Straight, clean & original with documented history and factory warranty. Read the Details:
WHEEL & TRACK LOADERS
2017 Cat 972M, Wheel Loader, A03041
$248,0002017 Cat 972M, Aggregate Handler package, 8,714 total frame hours, 4,631 hours at idle. 4,083 actual working hours on this machine, 6.25 yard GP bucket, documented history, low utilization machine. Read the Details!
2017 Cat 972M, Wheel Loader, A03042
$248,0002017 Cat 972M, 9,376 total frame hours, 5,117 hours at idle. 4,259 actual working hours on this machine, 6.25 yard GP bucket, documented history, low utilization machine. Read the Details!
2015 Cat 972M, Wheel Loader, A03043
$238,0002015 Cat 972M Wheel Loader, 8,876 Total frame hours, 2,783 Hours at idle. 6,093 Actual working hours on this machine. 100% New Radial Tires, 6.25 Yard GP bucket, Documented history. Read the Details!
2016 Cat 950M, Wheel Loader, A03057
$168,0002016 Cat 950M Wheel Loader, 5,887 frame hours, 2,106 Idle Hours recorded, 3,781 actual working hours. Matching Bridgestone Radials, 4.5 Yard GP bucket, Original paint, Documented history. Read the Details!
2015 Cat 950M, Wheel Loader, A03058
$168,0002015 Cat 950M Wheel Loader, 4,940 frame hours, 2,229 Idle Hours recorded, 2,711 actual working hours. Matching Bridgestone Radials, 4.5 Yard GP bucket, Original paint, Documented history. Read the Details!
2019 Volvo L260H, Wheel Loader, A02980
$288,0002019 Volvo L260H Wheel Loader, 7,320 Total frame hours, 2,333 Hours at idle. Only 4,987 Actual working hours. Radials, 9.5 Yard GP bucket, Ride control, 85,000 Pound weight, Dealer maintained, Documented history, Exceptionally clean. Read the Details:
2009 Cat 963D, Track loader, A03011
$148,0002009 Cat 963D, 5,435 Total hours, 1,226 Idle hours, 4,209 Actual operating hours. Enclosed cab, 3 Yard bucket w/ teeth. Machine is straight, clean & original with documented service history. Read the Details:
2016 Cat 980M, Wheel Loader, A03026
2016 Cat 980M Wheel Loader, 7,570 Total frame hours, 3,167 Hours at idle. Only 4,403 actual working hours. Radials, 7.5 Yard GP bucket, Ride control. Read the Details:
2017 Cat 986H, Wheel Loader, A02914
2017 Cat 986H, 10,100 total hours, 2,927 idle hours, 7,175 actual “in operation” hours. 2 year, 2,000 hour Factory Powertrain Warranty remaining. Aggregate Handler Package, 11 yard, GP bucket w/ Edge, Tires measure New, Reputation machine from a good home. Cat Dealer Inspection. Read the Details:
2008 Cat 950H, Wheel Loader, A02903
4,998 Original frame hours, 3,084 of those hours were documented at Idle, only 1,941 hours of actual “in operation” time on this machine. Legit and documented, Quick Coupler, 4 yard GP bucket, Maintenance history since new, Very good condition. Read the Details:
2018 Volvo L180H, Wheel Loader, A02916
$238,0002018 Volvo L180H, 6,250 hours, Auxiliary Hyd, 6 Yard GP bucket, 330 Horsepower, 62,000 pounds. Clean, straight, and original condition. Volvo dealer inspected & tested. Read the Details:
2011 Volvo L220G, Wheel Loader, A02936
2011 Volvo L220G, 8,900 Total frame hours, 4,157 Hours of idle time recorded, 7 Yard GP bucket, 367 Horsepower, 72,000 pounds. Original condition. Volvo Dealer Inspected, verified, & pressure tested. Read the Details:
OFF ROAD TRUCKS
2016 Cat 725C, Haul Truck, A03035
$248,0002016 Caterpillar 725C, 7,850 Total frame hours, 3,207 Idle hours, 4,643 Actual working hours on this truck. Good tires, Original condition, Matching pair of 725C trucks available. Read the Details:
2018 Volvo A25G, Haul Truck, A03040
$298,0002018 Volvo A25G, 4,350 Hours, Excellent radials, Tailgate, Original paint, Dealer inspected, as good and clean as they come. Read the Details:
Volvo A40G & K-Tec 1237 Scraper Package- A02965 & A02958
A02965, 2016 Volvo A40G, hitched up to A02958, 2018 K-Tec 1237 Scraper. 5,906 hours on the truck, we have a matching pair of these truck scrapers rigged up and ready to go. 37 yard scraper includes factory hitch and controls kit, and also includes original truck dump body. Volvo dealer tested and inspected. Read the Details:
2017 Cat 745, Haul Truck, A03033
2017 Caterpillar 745, 8,655 Total frame hours, 3,464 Idle hours, 5,191 Actual working hours on this truck. 75% Plus tires, Original condition, All service performed by dealer w/ full history available. Matching pair available. Read the Details:
2015 Cat 740B, Haul Truck, A02967
2015 Caterpillar 740B, 8,603 Total Frame hours, 3,516 hours were at Idle, matching pair of 2 trucks available, Tailgates, Radial Tires, Service History and very well maintained, reputation trucks. For Rent or Sale. Read the Details:
2014 Cat 730C, Haul Truck, A02953
2014 Caterpillar 730C Eject, 835 Total Frame hours, 308 hours were at Idle, only 527 actual operating hours on this truck since new. Pair of 2 matching trucks available, Radial Tires, Ejector Bodies, Original Paint, 1 owner, Service History since new, super clean original low hour trucks. Read the Details:
2016 Cat 725C, Haul Truck, A03036
2016 Caterpillar 725C, 6,400 Total frame hours, 2,504 Idle hours, 3,896 Actual working hours on this truck. Good tires, Original condition, Matching pair of 725C trucks available. Read the Details:
ROAD RECLAIMERS
2018 Cat RM500B, A02860
2018 Cat RM500B, 978 total hours. Machine has remaining 2 year, parts and service factory Cat Warranty. Reputation 1 Owner machine, Universal rotor for both Asphalt Reclamation or Soil Mixing. This machine will not disappoint the most discriminating buyer. Cat Dealer maintained since new. Full documentation available. Read the Details:
SCRAPERS
2015 Case IH Steiger 620 QUADTRAC & K-Tec 1228 Scraper Package- A03050 & A03049
$518,0002015 Case IH Steiger 620 Quadtrac, with K-Tec 1228, 28 yard scraper, 3,900 Hours on the Quadtrac, 100% New tracks, Extremely clean and well maintained units, Dealer tested, Inspected & Ready to go. Read the Details:
2017 Case IH Steiger 580 QUADTRAC & 2022 K-Tec 1228 Scraper Package- A03039 & A03052
$598,0002017 Case IH Steiger 580 Quadtrac with 2022 K-Tec 1228, 28 Yard scraper, 2,400 Hours on the Quadtrac, Factory Warranty till April 2023. 100% New Tracks, Extremely Clean and well maintained unit, Dealer tested, Inspected & Ready to go. Read the Details:
2014 Case IH Steiger 580 QUADTRAC & 2022 K-Tec 1228 Scraper Package- A03038 & A03051
$588,0002014 Case IH Steiger 580 Quadtrac, with 2022 K-Tec 1228, 28 Yard scraper, 2,450 Hours on the Quadtrac, 100% New tracks, Extremely clean and well maintained Unit, Dealer tested, Inspected & Ready to go. Read the Details:
2017 John Deere 9520RX & Deere 2412DE Scraper Package – A03046 & A03048
$488,0002017 John Deere 9520RX tractor with Deere 2412DE, 24 yard scraper, 4,475 Hours, Extremely clean and well maintained matching pair available. Full documented history, Dealer tested, Inspected & Ready to go. Read the Details:
2016 John Deere 9570RX & K-Tec 1233 Scraper Package- A02996 & A03015
$468,0002016 John Deere 9570RX, hitched up to K-Tec 1233 scraper, 4,800 hours on the tractor, rigged up and ready to go now. 33 yard K-Tec scraper, Extremely clean and well maintained units. Dealer tested, inspected & ready to go. For Rent or Sale. Read the Details:
2015 K-TEC 1233, Pull Scraper, A03037
$148,0002015 K-Tec 1233 ADT Pull Scraper. 36 Yard capacity, Very nice and clean scraper. We have a matching pair of these ADT scrapers. Read the Details:
2014 K-TEC 1233, Pull Scraper, A03062
$178,0002014 K-Tec 1233, Direct Mount Pull Scraper. 33 yard capacity, very nice and clean scraper. Read the Details:
2014 K-TEC 1233, Pull Scraper, A02956
$148,0002014 K-Tec 1233 ADT Pull Scraper. 36 yard capacity, very nice and clean scraper. Comes with joystick controls, harness, and hitch for Volvo A40. Read the Details:
Volvo A40G & K-Tec 1237 Scraper Package- A02965 & A02958
A02965, 2016 Volvo A40G, hitched up to A02958, 2018 K-Tec 1237 Scraper. 5,906 hours on the truck, we have a matching pair of these truck scrapers rigged up and ready to go. 37 yard scraper includes factory hitch and controls kit, and also includes original truck dump body. Volvo dealer tested and inspected. Read the Details:
2016 Cat 627K, Scraper, A02877
2016 Caterpillar 627K, 5,070 hours, Push Pull, Erops, A/C, Original paint, 33.25+29 Rubber, Full documented history, Under dealer care since new. This machine will not disappoint the most discriminating buyer. Read the Details:
CAT 631P Pull Scraper, New Conversion, A01889
New Conversion, Cat 631C scraper converted to Pull, 30 yard capacity. Refurbished as needed, 100% hydraulic cylinders rebuilt. Engineered, proven neck design. Read the Details:
2003 NOBLE 417B Pull Scraper, A02924
2003 Noble 417B, 17 yard, pull scraper. These Noble Brand scrapers were some of the best on the market. They are purpose built, extreme duty, Eject style construction scrapers. All replacement parts readily available and still manufactured, this unit is still in original paint. Read the Details:
EXCAVATORS & MATERIAL HANDLERS
2019 Cat 336, Next Gen Excavator, A03014
$288,0002019 Cat 336, Next Gen Excavator, 3,700 total hours, 1,486 of those hours at idle, Auxiliary Hydraulics, 2D Grade Control, 10’6” Stick, 54” Bucket, Documented History, Very Clean machine. Read the Details:
2018 Cat M318F, Wheeled Excavator, A03018
$238,0002018 Cat M318F Wheeled Excavator, 475 total hours, Auxiliary hydraulics, Variable adjustable boom, 8’6” Stick, 60” Hydraulic tilt bucket, Very clean low hour machine. Read the Details:
J.J. Scheckel “Rock Eater” Boom Attachment for Cat 390FL
$158,000Brand New, “The ORIGINAL” Extreme High Leverage J.J. Scheckel “Rock Eater” Ripper Boom Attachment, to fit Cat 390FL. Perform production ripping projects in frost and rock, not previously possible. Read the Details:
2015 Cat MH3059 Material Handler, A03023
$348,00010,955 Total hours, 3,614 Idle hours, 7,341 Actual working hours on this machine. Ground Access and High Rise Cab, 130,000 lbs Operating weight, 35’ Boom, 29’ Stick, Generator, 5,600 to 40,000 lb Lift capacity depending on position. We have a package of 3 matching machines in stock. Read the Details:
2015 Cat MH3059 Material Handler, A03024
$348,00010,920 Total hours, 3,664 Idle hours, 7,256 Actual working hours on this machine. Ground Access and High Rise Cab, 130,000 lbs Operating weight, 35’ Boom, 29’ Stick, Generator, 5,600 to 40,000 lb Lift capacity depending on position. We have a package of 3 matching machines in stock. Read the Details:
2014 Cat MH3059 Material Handler, A03025
$348,00010,236 Total hours, 3,155 Idle hours, 7,081 Actual working hours on this machine. Ground Access and High Rise Cab, 130,000 lbs Operating weight, 35’ Boom, 29’ Stick, Generator, 5,600 to 40,000 lb lift capacity depending on position. We have a package of 3 matching machines in stock. Read the Details:
2015 Cat 390FL Excavator, A03029
2015 Cat 390FL, 6,280 Total hours, Mass Arrangement, OEM Cat Warranty Remaining until July 2023. Reputation machine, 27’ Boom, 11’ Stick, 91” 7.5 yard Bucket. Read the Details:
2019 Cat 374FL Excavator, A02961
$618,0002019 Cat 374FL, 3,663 total hours, 2 years of remaining Factory Warranty. Reputation 1 Owner Machine, Grade Control, 11’10” Stick, 4 yard 60” Bucket, Auxiliary Hydraulics tool controls equipped. Super clean machine. Read the Details:
2017 Cat 349FL, Custom, Ultra High Reach Demolition Excavator, A02763
2017 Cat 349FL, Zero hours on a JJ Scheckel Custom, Ultra High Reach Demolition Conversion. 96’6” total reach, Quick Attach Boom and lines, Hydraulic Tilt Cab, extra counterweight, Highest Quality package. Optional Cat MP324 Multi processor tool and jaw sets at additional price if needed. The stock Boom, Stick, and Bucket are also available if needed at additional price. Read the Details:
2020 Cat 330 Next Gen Excavator, A02905
1,138 total hours, 626 of those hours at idle, 2D Grade Control, Auxiliary hydraulics, Tool control, 10’6” Stick, 4 Years remaining CAT Premier Warranty. This machine will not disappoint the most discriminating buyer, save big money from new. Read the Details:
MOTOR GRADERS
2011 Cat 140M VHP, Motor Grader, A02987
$248,0002011 Cat 140M VHP, Motor Grader, Verified 735 total hours, 451 idle hours, only 284 actual working hours. From State Department of Transportation. Stored Indoors, 14’ Moldboard, Mid mount V Ripper Scarafier. Tier 3 pre emissions, Machine as clean as they come. Read the Details:
2012 Cat 16M VHP PLUS, Motor Grader, A03044
2012 Cat 16M VHP PLUS, Verified 3,150 total hours, 1,196 Idle hours, Only 1,953 actual working hours on this machine. 16’ Moldboard, Ripper, Grade Control Arrangement, 1 Owner, Machine as clean as they come, Full documented history. Read the Details:
DUMP WAGONS
Holmes 30 Ton Dump Wagon, A02823
2020 Holmes 30 Ton Dump Wagon, fabricated from used articulated dump truck chassis. Hydraulic Brakes, Standard bull hitch with 360 degree oscillation, HD Jack Stand, Good tires, this is a very nice unit. Read the Details:
AGGREGATE EQUIPMENT
2017 Screen Machine 514TS3, Spyder, A02894
2017 Screen Machine 514TS3 Spyder, Triple Deck Mobile Screen Plant, 1,760 hours, this unit can produce 4 product sizes, with a 5th scalped oversize product on the loading grizzly, as clean and original as they come, priced to sell! Read the Details:
2018 Sandvik QA451, Screen Plant, A02833
2018 Sandvik QA451, 553 hours, Mobile 3 Deck Double Screen Plant, Qty 2 independent 10’ + 5’ vibratory 3 deck screen boxes. This unit can produce 4 product sizes, with a 5th scalped oversize product on the loading grizzly. Added magnet conveyor option, 1 Owner machine, Clean & Original. Read the Details:
2015 Screen Machine JXT, Crusher, A02893
2015 Screen Machine JXT, Mobile Jaw Crusher, 1,800 hours, 26” + 45” Jaw size, 376 Horsepower Caterpillar C9.3 Engine, Capable of crushed concrete or rock. As clean and nice as they come in used crushers. Read the Details:
ON ROAD TRUCKS & TRAILERS
2018 Mack Granite GU713, On Road Dump Truck, A02690
2018 Mack GU713. 15,800 Original Miles, Matching Pair Available, 455 HP Mack Engine, Allison Automatic Transmission, Tri Axle, 226” Wheel Base, 16’ Hardox Box. 1 Owner previous County Owned Truck, as nice and clean as anything on the market. Save Big from New. Read the Details:
COMPACTION EQUIPMENT
2016 Cat 836K, Waste Compactor, A02900
$488,0002016 Cat 836K Compactor, 1 Year Factory Warranty Remaining, 7,050 total frame Hours, Documented Service and maintenance history since new. Excellent Feet, Clean Cab, Tested, and ready to work. As good as they come. Read the Details:
2015 Cat 836K, Waste Compactor, A02876
$458,0002015 Cat 836K Compactor, 1 Year Factory Warranty remaining, 8,275 Total frame Hours, 2,937 of those were idle hours, only 5,338 hours actual in operation time on this machine. Documented Service and maintenance history since new. Excellent feet, Clean cab, Tested, and Ready to work. Read the Details:
2007 Cat 826H, Landfill Compactor, A02895
$288,0009,800 hours on Complete Dealer Rebuild., 3,767 of those hours were documented at idle, only 6,033 actual “in operation’ hours on this machine since Rebuild. Excellent Wheels and Feet, documented maintenance history, all pressures and systems tested to OEM Spec. Nationwide Transport available. Read the Details:
2022 Holmes Double Drum Sheepsfoot Rollers
$63,5002 available sizes, 48”+48” and 60”+60”, These are the best built pull behind sheepsfoot rollers on the market. Heaviest bearings, cleaners, and hitches. Built to last. Read the Details:
2022 Holmes 16F Roller Blade
$34,500Brand New, 2021 Holmes 16F Roller Blade, Extreme Duty, 16’ Foot Hydraulic box blade, with 42” smooth drum roller, to maintain haul roads, Building sites, or any construction projects that require leveling, smoothing, packing, or compacting. For Rent or Sale. Read the Details:
2022 Holmes 11F Padfoot Roller Blade
$48,300Brand New, 2021 Holmes 11F Roller Blade with Wheel Kit, Extreme Duty, 11 foot Hydraulic box blade, with padfoot/sheepsfoot drum rollers. This unit has the wheel kit lift attachment for crossing concrete or pavement as needed. This tool is what contractors are going to for the best system in pull behind compaction. For Rent or Sale. Read the Details:
2022 Holmes 11F Roller Blade
$28,500Brand New, 2021 Holmes 11F Roller Blade, Extreme Duty, 11 foot Hydraulic box blade, with 42” smooth drum roller, to maintain haul roads, Building sites, or any construction projects that require leveling, smoothing, packing, or compacting. For Rent or Sale. Read the Details:
New, Holmes Roller Blade Wheel Kit
$8,100Brand New, Holmes Wheel kit, to fit both the 11F and 16F Roller Blades, Extreme Duty, New 385/65R22.5 Tires, 10 Bolt heavy duty hubs. These kits clamp on to the existing back rollerblade bar, and when lifted all the way up, the wheel kit will carry the entire Rollerblade unit up on the tires for transport on pavement. Read the Details:
2015 Cat 836K Waste Compactor, A02844
2015 Cat 836K Compactor, 10,980 total frame Hours, 5,978 of those were idle hours, only 5,002 hours actual in operation time on this machine. Documented service and maintenance history since new. Excellent feet, Clean cab, fully serviced, tested, and ready to work. Read the Details:
2005 Cat 825H Compactor, A02680
2005 Cat 825H Compactor, Well Maintained, Excellent Feet, Erops, Tilt Blade, Clean Machine, Cat Facts Service History Available. Rental Available. For Rent or Sale! Read the Details:
2008 Cat CP56, Compactor, A02784
2008 Cat CP56, 84” Vibratory pad foot, 2,585 hrs, Enclosed Cab, A/C, Front blade option, Original Paint, Very well maintained machine, Fully Serviced and ready to go. Full service history, oil samples, & current testing reports available. For Sale or Rent. Read the Details:
DISKS & PLOWS
2022 Tatu Extreme Heavy Duty, 12’6” + 40”, Offset Disk
$42,000New Tatu EHD, 12’6” Cutting Wide, with 40” Diameter, Notched Disk Blades. Extra Heavy Duty, Offset Disk with transport wheels. These are the heaviest, most extreme duty, construction disks on the market. Take a very close look. Read the Details:
2022 Tatu Extreme Heavy Duty, 12’6” + 32”, Offset Disk
$39,000Tatu EHD, Extreme Heavy Duty, 12’6” Cutting Wide, with 32” Diameter, Notched Disk Blades. Extra Heavy Duty, Offset Disk with transport wheels. These are the heaviest, most extreme duty, construction disks on the market. Take a very close look. Read the Details:
2022 Tatu Extreme Heavy Duty, 9’6” + 40” Offset Disk
$33,000Tatu EHD, Extreme Heavy Duty, 9’6” Cutting Wide, with 40” Diameter, Notched Disk Blades. Extra Heavy Duty, Offset Disk with transport wheels. These are the heaviest, most extreme duty, construction disks on the market. Take a very close look. Read the Details:
2022 Tatu Extreme Heavy Duty, 12’6” + 40”, Hinge Offset Disk
$33,000Tatu EHD, Extreme Heavy Duty, 12’6” Cutting Width, with 40” Diameter, Notched Disk Blades. Extra Heavy Duty, Hydraulic adjustable hinge style disk, no transport wheels. These are the heaviest, most extreme duty, construction disks on the market. Take a very close look. Read the Details:
2022 Tatu Extreme Heavy Duty, 9’6” + 32”, Offset Disk
$32,000Tatu EHD, Extreme Heavy Duty, 9’6” Cutting Wide, with 32” Diameter, Notched Disk Blades. Extra Heavy Duty, Offset Disk with transport wheels. These are the heaviest, most extreme duty, construction disks on the market. Take a very close look. Read the Details:
ATTACHMENTS
BLADES
A03056, Cat D11T, 98 Yard Coal Blade
$88,000Cat D11T, 98 Yard Coal Blade, Part # 238-2935, s/n 7GW01462. Moldboard only as pictured. Blade face is clean, Blade in good condition. 26’8” width, 10’ tall. Read the Details:
A02935, Cat D10T, U Blade Complete
$48,000Complete Cat D10T U Blade, comes with Moldboard, blade arms, twin tilt, cross bar, everything included as pictures show. Very Solid Blade removed from 2005 Cat D10T. Blade face has wear resistant plate. Read the Details:
A02892 ~ Jones Push Cushion Blade, to fit Cat D10T
$38,000Scraper Push Cushion blade as pictures show, to fit Cat D10R, D10T. made by Jones. Manufactured in 1998, Very hard to find Blade that appears to be in pretty solid condition or a good core to start with if you want to rebuild fully. Read the Details:
A02898 ~ Semi U Blade, to fit Cat D10T
$28,000SU, Semi U blade, Moldboard only, to fit Cat D10R, D10T. s/n 1RW00811, arrangement 9W-2927. This is a core blade that could use a rebuild.
A02909, Cat D10R/ D10T Push cushion Blade
$38,000Complete Cat D10R or D10T Push cushion Blade. Complete as pictures show. Seems pretty solid, Hard to find blade. Read the Details:
A01318 ~ CAT D9R SU Blade
$15,000Came off D9N, SU moldboard only, very nice and clean face, fair cutting edges. Read the Details:
A02480 ~ Cat D6T LGP Straight Blade, Complete
$25,500Complete Straight Blade off Cat D6T LGP, Includes Both Push Arms, Cat part # 334-1776 and 334-1775. Also includes the Moldboard, Tilt Cylinder, and Brace, Cat part # 334-1772. Read the Details:
A02125 ~ CAT D6T XW Angle Blade
$18,500900 hrs since NEW. Angle Blade complete, off Cat D6T XW with 900 hrs, Complete w/ Twin Tilts, C Frame, Blade & Caps. Very solid and clean condition. Face is excellent. Read the Details:
A02122 ~ CAT D6R / D6T XW, SU Blade
$18,500SU Blade Moldboard, Cat Blade Group # 4Z9229, and 4Z9226, Cat Blade Assembly # 143-0499, and 4Z9230. Read the Details:
A02988, Cat D6T LGP Angle Blade
$24,000Complete Cat angle blade removed from 2016 Cat D6T LGP, s/n HTZ00577. Complete as pictures show, twin tilt, was on machine with 1,466 hours of run time. Read the Details:
A02486 ~ Cat D6R / D6T LGP, Straight Blade
$22,500Cat D6R LGP, Takeoff straight Blade w/ tilt, Complete. Read the Details:
A02561 ~ Cat D6R LGP / D6T LGP, S Blade, Complete
$28,000A02561, Cat D6R, or D6T LGP, Straight Blade Assembly, Part # 108-3973, s/n 1SP02770, Complete with Both Push Arms, Tilt Cylinder, and Brace. In Stock. Read the Details:
A01939 ~ Cat D9L Cross Tube
$1,800Cat D9L, Cross Tube, part #9J6061, Stabilizer link for blade. Good solid condition, new cost $ 6,619. Read the Details:
A01938 ~ Cat D9L Push Arms Set
$5,000Cat D9L, Push arms set, part numbers 9J6677 & 9J6678, Blade push arm group. Read the Details:
A02147 ~ Cat D6H/D6R LGP Push Arms Set
$7,500CAT Part numbers 4T-6733 & 4T-6734 Blade Push Arm. Read the Details:
A02148 ~ CAT D6R / D6T LGP Push Arms Set
$7,500Cat Part numbers 4T-6733 & 4T-6734 Blade Push Arms. Read the Details:
A02424 ~ Cat D9R/T Blade Link, Part # 246-1039
$2,500Used Cat D9T blade link, part # 246-1039. Good condition. Fits to Cat D9T or D9R. Read the Details:
BUCKETS
A02993, Cat 390FL, 66” Bucket
Cat 390FL Bucket, HB2 Linkage, 66” Wide, 5 yard capacity. Removed from 2017 Cat 390FL, s/n FEH10003. Machine had 4,100 hours run time. Pins included as pictures show. Read the Details:
REAR SCREENS
A02040 ~ CAT D8T Rear screen
$1,200CAT D8T, Rear screen, part # 219-2892, good solid condition, new OEM cost is $3,175. Read the Details:
COUNTERWEIGHTS
A02460 ~ Cat D10T Counterweight
$20,000Cat Part # 248-6690, New style counterweight, Removed from a Cat D10T from our Stock. Read the Details:
A02461 ~ Cat D10T Counterweight
$20,000Cat Part # 248-6690, New style counterweight, Removed from a Cat D10T from our Stock. Read the Details:
A01951 ~ CAT D10R / D10T Rear Counterweight
$8,500CAT D10R / D10T Rear Counterweight, part number 6T-3583, removed from D10R, Good condition, complete with brackets. Read the Details:
A01655 ~ CAT D10N / D10R / D10T Rear Counterweight
$8,500Counterweight removed from D10R, good condition. Read the Details:
A01769 ~ CAT D9L Rear Counterweight
$3,500Counterweight removed from Cat D9L, good condition, missing rear hitch clevis. Read the Details:
A01770 ~ CAT D9L Rear Counterweight
$3,500Counterweight removed from Cat D9L, good condition, missing rear hitch clevis and hanger brackets. Read the Details:
DRAWBARS
A01764 ~ CAT D11N / D11R / D11T Drawbar
$2,500Bolts and pins on tractor, drawbar attachment, no rear clevis. Good condition. Read the details:
A01775 ~ Cat D10N / D10R / D10T Drawbar
$1,200Bolts on, and pins on the bottom, custom fabricated. Good condition. Read the Details:
A01778 ~ CAT D10N / D10R / D10T Eject Scraper Drawbar
$5,000Brand New, for Eject Scraper, bolts on tractor, pins on bottom, and accepts Eject scrapers. Read the Details:
A02443 ~ Cat Drawbar, to fit Cat D10R, Cat D10T
$10,000Cat Drawbar originally off Cat D9L, We professionally converted to Fit to the Cat D10R, and Cat D10T Tractors, Pin on Style. Read the Details:
A01368 ~ CAT D6M/N Drawbar
$500Very good condition, fits Cat D6M, and D6N tractors, list price is $1,200. Read the Details:
HYDRAULIC HAMMERS
A02696 ~ Cat H120E S Hydraulic Hammer, Dealer Rebuild
$39,800A02696 ~ 2013 Cat H120ES Hammer, s/n HHE00495. Zero Hours on Full Zeigler Cat Rebuild, documents available. Read the Details:
HYDRAULIC CYLINDERS
A02204 ~ Cat 5230 Shovel, Rebuilt Stick cylinder, part #127-0865
$25,000Qty 2, Cat part # 127-0865, Rebuilt Cat 5230 Stick cylinder. Outright Price No exchange needed. This is Rebuilt Cylinder from Mining company spare parts warehouse we purchased after they ceased operations. Read the Details:
A02994 & A02995, Cat 390FL Lift Cylinders
$20,000Qty 2, Cat part # 362-9780 Boom lift cylinders, removed from 2017 Cat 390FL, s/n FEH10003. Machine had 4,100 hours run time. everything included as pictures show. $31,274 New Price. Excellent original condition. Read the Details:
A02205, Cat 994, Rebuilt Lift Cylinder, Part # 193-4076
$25,000Cat part # 193-4076 & 569-8568. Rebuilt Cat 994 Boom lift cylinder. Outright Price No exchange needed. This is Rebuilt Cylinder from Mining company spare parts warehouse we purchased after they ceased operations. Read the Details:
A02162 & A02163 ~ Cat 785 Rear Suspension Strut Cylinders, Rebuilt
$12,670Rebuilt Cat 785 rear suspension Accumulator strut cylinders, includes new bushings. Fits to Cat 785B, 785C, 785D, and 785G Trucks. Read the Details:
A02459 ~ Cat D9T Lift Cylinder Set
$10,000Lift cylinder, and cannon set, removed from D9T. Cat Part numbers for the lift cylinder group, includes 204-7462, and 204-7463. Read the Details:
A02537 & A02538 ~ Cat D8R Lift Cylinders
$2,800Cat Part # 4Z-6310, Complete as pictures show. Good used condition. Cat Part # 4Z-6310. New Cat OEM Price is $ 7,281 each. Read the Details:
A01795 ~ CAT # 6P-8853, Cat D9L Lift Cylinder Group
$2,000Lift cylinders for Cat D9L Dozer, Good Condition, New cost $12,600. Read the Details.
A01797 ~ CAT # 6P-8853, Cat D9L Lift Cylinder Group
$2,000Lift cylinder for Cat D9L Dozer, Good Condition, New cost $12,600. Read the Details:
A01798 ~ CAT # 6P-8853, Cat D9L Lift Cylinder Group
$2,000Lift cylinder for Cat D9L Dozer, Good Condition, New cost $12,600. Read the Details:
A01699 ~ CAT 229-9744, Cat D8R Lift Cylinder Yoke
$1,200Good used takeoff lift cylinder cannon, removed from D8R, 7XM series. Read the Details:
A01799 ~ CAT # 9J-6006, D9L Lift Cylinder Yoke
$1,000Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $5,228. Good solid condition. Read the Details:
A01800 ~ CAT # 9J-6006, D9L Lift Cylinder Yoke
$1,000D9L Lift Cylinder Yoke, Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $ 5,228. Good solid condition. Read the Details:
A01801 ~ CAT # 9J-6006, D9L Lift Cylinder Yoke
$1,000Yoke Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Read the Details:
A01802 ~ CAT # 9J-6006, D9L Lift Cylinder Yoke
$1,000Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Read the Details:
RIPPERS
A02457 ~ Cat D9T Multi Shank Ripper
$38,000Cat Part # 217-3562, Multi Shank Ripper Arrangement. s/n CRM00335. Read the Details:
A01803 ~ CAT # 9J-7359, D9L Ripper Mounting Group
$1,500Part # 9J-7359, removed from Cat D9L, 14Y series. Read the details:
A02262 ~ Cat D10T Single Shank Ripper
Cat Part # 180-2404, Single Shank Ripper Arrangement. s/n BRT00261. Read the Details:
A01842 ~ CAT D9R Single Shank Ripper Rebuilt
S/N 5RP1576, four barrel, single shank ripper, removed from Cat D9R, very solid condition, rebuilt joints, no hyd pin puller. Read the Details:
ROLLER SHELL KITS
A02576 ~ New Roller Shell Kit, to fit Cat CS683E, CS76 & CS76XT
$11,800New Padfoot Roller Shell Kit, to fit Cat CS683E, CS76, and CS76XT Vibratory Rollers. Read the Details:
A02577 ~ New Roller Shell Kit, to fit Cat CS56 & CS563E
This is a brand new Pad foot Shell Kit, Converts Smooth drum rollers, to pad foot, or dual purpose machine. Read the Details:
A02579 ~ New Roller Shell Kit, to fit Cat CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B & CS78B Rollers
This is a brand new Pad foot Shell Kit, Converts Smooth drum rollers, to pad foot, or dual purpose machine. Read the Details:
TAILGATES
QTY 1 – CAT 745C Tailgate Assembly / NEW
$14,500Brand New, Part # 384-7353, factory style tailgate assemblies. To Fit all CAT 745C Articulated Trucks. Read the Details:
QTY 4 – CAT 740 / 740B Tailgate Assemblies / NEW
$12,000Priced Each. Brand New, Part # 304-5455, factory style tailgate assemblies. To fit all CAT 740 / 740B Articulated Trucks. Read the Details:
QTY 4 – Volvo A40E, A40F, Tailgate Assemblies / NEW
$11,000Priced Each. Brand New, factory style tailgate assemblies. To fit all Volvo A40E, and A40F Articulated Trucks. Read the Details:
TRANSMISSIONS
A02006 ~ CAT Rebuilt Trans Housing, Part # 3T-4575
$2,800Rebuilt Caterpillar D8L Transmission Housing Case, Cat Part # 3T-4574, 3T-4575, or 7G0379. Read the Details:
A02158 ~ Cat 785 Transmission, Dealer Rebuilt & Tested
Cat Dealer Rebuilt Cat 785 Transmission, Fits to Cat 785B, 785C, & 785D, Trucks. Read the Details:
TRACKS AND TIRES
A03039U, Set of 4 Tracks, Case IH Steiger Quadtrac
$23,800Good used Set of 4 Tracks, Removed from Case IH Steiger Quadtrac 580, packaged in factory wood crates as pictures show. We installed Brand New “Scraper series” tracks is the only reason these are available. Read the Details:
A03038U, Set of 4 Tracks, Case IH Steiger Quadtrac
$23,800Good used Set of 4 Tracks, Removed from Case IH Steiger Quadtrac 580, packaged in factory wood crates as pictures show. We installed Brand New “Scraper series” tracks is the only reason these are available. Read the Details:
A03050U, Set of 4 Tracks, Case IH Steiger Quadtrac
$20,400Good used Set of 4 Tracks, Removed from Case IH Steiger Quadtrac 620, packaged in factory wood crates as pictures show. Read the Details:
A02378 ~ Cat D9R / D9T Track Groups – Used
$14,000Used Track groups, to fit Cat D9R or Cat D9T, 24” grouser Pads, mounted to Heavy Duty OEM SALT Rails. Read the Details:
A03043U, Set of 4 used Radial 26.5 R25 Tires.
$3,000Qty 4, Used takeoff set of Tires removed from A03043, Cat 972M Wheel Loader. All held air, would make a good backup set to have around. Read the Details:
Qty (4) Yokohama 20.5 R25, Used Tires, to Fit Cat 930K
$1,350Used takeoffs, 20.5+R25 Size, Radial, Fits to 930 Series Wheel Loaders. Read the Details:
A01984 ~ Cat D9R / D9T Track Groups – New
New ITR Brand Track groups, to fit Cat D9R or Cat D9T, 27” Extreme Service Pads, mounted to ITR Heavy Duty SALT Rails, Includes Alligator clips, and master pads. Read the Details:
WINCHES
A03021 ~ Allied W6G Winch package, Fits Cat D6T
$14,500Allied W6G Winch removed From 2013 Cat D6T, complete with controls. 60,000 lbs line pull. Read the Details:
MISCELLANEOUS ATTACHMENTS
J.J. Scheckel “Rock Eater” Boom Attachment for Cat 390FL
$158,000Brand New, “The ORIGINAL” Extreme High Leverage J.J. Scheckel “Rock Eater” Ripper Boom Attachment, to fit Cat 390FL. Perform production ripping projects in frost and rock, not previously possible. Read the Details:
A02848, 2015 Cat MP318 Multi Processor
$78,0002015 Cat MP318 Multi Processor. S/N MP200209, Quick change jaws. Comes with Pulveriser Jaw set installed as pictures show. Very clean low hour unit. Read the Details:
A02991, Cat 390FL, 32’10” Boom Group
$50,000Cat part # 382-7315 Boom Arrangement. Complete 32’10” factory Boom removed from 2017 Cat 390FL, s/n FEH10003. Machine had 4,100 hours run time. everything included as pictures show. Stick cylinder, Pins, ext. Over $150,000 New Price. This boom is excellent original condition. Read the Details:
A02992, Cat 390FL, 14’4” Stick Group
$45,000Cat part # 363-1636 Stick group. 14’4” Complete Stick assembly removed from 2017 Cat 390FL, s/n FEH10003. Machine had 4,100 hours run time. everything included as pictures show. Bucket cylinder, HB2 Bucket Linkage, Over $75,000 New Price. This Stick is excellent original condition. Read the Details:
A02945, Cat 320 Next Gen, Auxiliary Hydraulic Kit
$12,800New, In Stock, Complete HKX, 2 way auxiliary hydraulic kit, to fit HEX series, Cat 320 Next Gen Machines. Includes all hard lines, joystick control, we can provide packing list on request. Built for 2 way power, to run hydraulic thumb or other attachments requiring 2 way power. Read the Details:
QTY 10 – CAT 740 / 740B Heated Box Kits
$2,500Priced Each. Qty 10, used heated body kits, to fit Cat 740 and 740B trucks. Each kit consisting of the following Cat part numbers. Priced less than half of new cost. Read the Details:
A02302, CAT Quick Coupler, to fit CAT 938K
$3,400Cat 938K Hydraulic Quick Coupler, to fit Cat 938K. Part # 347-6470. Part of 333-6890 coupler arrangement. This was a low hour takeoff.
A03050U1, Front Weight Bracket, Case IH Steiger Quadtrac
$10,000Good used cast Front weight bracket w/ 22 suitcase weights, Removed from Case IH Steiger Quadtrac 620, exactly as pictures show. Fits all models Quadtrac. Read the Details:
A03050U2, Rear Hitch & Drawbar, Case IH Steiger Quadtrac
$5,000Good used factory rear hitch & drawbar, Removed from Case IH Steiger Quadtrac 620, exactly as pictures show. Fits all models Quadtrac. Read the Details:
A03039U2, Rear Hitch & Drawbar, Case IH Steiger Quadtrac
$5,000Good used factory rear hitch & drawbar, Removed from Case IH Steiger Quadtrac 580, exactly as pictures show. Fits all models Quadtrac. Read the Details:
MISCELLANEOUS EQUIPMENT PARTS
Cat 785 Turbo, OEM Reman Cat, A02199
$1,600New Cat Part # 115-2258 and Reman part # 0R-7166, OEM New Cost is $ 4,035, and the OEM Reman cost is $ 2,421
This is a New in the original Box, Reman Turbo, was on shelf as spare at mine site that discontinued operations. Read the Details:
A02188 & A02189 ~ Cat 785 Front Wheel Hubs, Rebuilt
$6,1002 Cat Rebuilt front wheel hubs, to fit Cat 785 Truck. Read the Details:
A02190 & A02191 ~ Cat 785 Front Wheel Spindles, Rebuilt
$10,4502 Cat Rebuilt front wheel spindles, to fit Cat 785 Truck. Read the Details:
A02168 ~ Cat 785 Hydraulic pump, Rebuilt
$1,850Rebuilt Cat 785 Pump. New Cat Part # 3T-0260 and 0R-7822. Read the Details:
A02159 ~ Cat 785 Rear Axle Link, Rebuilt
$1,250Cat Rebuilt Rear axle dog bone link, to fit Cat 785 Truck. Read the Details:
A02152 & A02153 ~ Cat 785 Hydraulic Pumps, New OEM Cat
$2,650Priced Each. New OEM Cat 785 Hydraulic Pumps, Fits to Cat 785B, 785C, 785D, and 785G Trucks. Read the Details:
Qty 500 CAT 826/836 Landfill Compactor Wheel Tips
$110Priced Each. CAT part# 352-5936, Trash compactor feet tip assemblies to fit CAT 826 and 836 Landfill Compactors. Read the Details:
Set of 4, CAT J800 size bucket teeth, part # 6I-8803
$600Set of Brand New, ITR Brand, Caterpillar J800 Size Bucket Teeth, with pins and retainers.
Comes with everything in picture. Read the Details:
TOOLS AND SHOP EQUIPMENT
2018 Landa TR6000, Mobile Pressure Washer, A02595
$18,0002018 Landa TR6000, Commercial Duty Pressure Washer, Hot Water Steam Cleaner, Mounted on Factory Trailer with 330 gallon tank. Honda Engine, Loaded. Full Warranty. Read the Details:
2014 Cat XQ30, Generator, A02998
$24,0002014 Cat XQ30 Generator. 6,236 Total hours, 30 KW, Both Single and 3 Phase Power. 50 Horsepower Cat Diesel Engine, Weather and sound proof enclosure, trailer mounted. These are 1 owner generators that have been maintained by Cat Dealer since new. Extremely Clean, and Original. Read the Details:
2015 Cat XQ30, Generator, A02999
$24,0002015 Cat XQ30 Generator. 7,895 Total hours, 30 KW, Both Single and 3 Phase Power. 50 Horsepower Cat Diesel Engine, Weather and sound proof enclosure, trailer mounted. These are 1 owner generators that have been maintained by Cat Dealer since new. Extremely Clean, and Original. Read the Details:
2015 Cat XQ30, Generator, A03002
$24,0002015 Cat XQ30 Generator. 7,484 Total hours, 30 KW, Both Single and 3 Phase Power. 50 Horsepower Cat Diesel Engine, Weather and sound proof enclosure, trailer mounted. These are 1 owner generators that have been maintained by Cat Dealer since new. Extremely Clean, and Original. Read the Details: