2017 Cat 349FL, Custom, Ultra High Reach Demolition Excavator, A02763

$458,000

2017 Cat 349FL, Zero hours on a JJ Scheckel Custom, Ultra High Reach Demolition Conversion. 96’6” total reach, Quick Attach Boom and lines, Hydraulic Tilt Cab, extra counterweight, Highest Quality package. Optional Cat MP324 Multi processor tool and jaw sets at additional price if needed. The stock Boom, Stick, and Bucket are also available if needed at additional price. Read the Details:

Details Photos VideoPrint Brochure Button

A02763 In stock

Description

2017 Cat 349FL, Zero hours on a JJ Scheckel Custom, Ultra High Reach Demolition Conversion. 96’6” total reach, Quick Attach Boom and lines, Hydraulic Tilt Cab, extra counterweight, Highest Quality package. Optional Cat MP324 Multi processor tool and jaw sets at additional price if needed. The stock Boom, Stick, and Bucket are also available if needed at additional price. Read the Details:

Carrier Machine, Information
•  2017 Cat 349FL
•  6,400 Total Machine Hours
•  2,368 hours were at Idle, as reported on machine ECM.
•  4,032 actual “in operation, Working” hours.
•  Average Lifetime RPM – 1,528 RPM
•  Average lifetime fuel rate – 8.31 gallons per hour
•  Overall lifetime load factor – 36%
•  This package comes with the stock boom, Stick, and Bucket also.
•  The Stock stick is a 12’6” length, the stock bucket is 74”.
•  Cat C13 Accert, Tier 4 Final, Diesel Engine, 425 HP
•  Machine width – 11’11”
•  Rear view camera installed
•  Auxiliary hydraulic kit installed to run 3-piece boom, and work tool, with rotate function.
•  Undercarriage measures 85% Remaining.

85’ foot, 3-Piece, Ultra High Reach Demolition Boom, Information
•  85’, 3-piece, Boom
•  Main Boom section, has a unique, Modular separating quick coupling design, for easy on and off for transport.
•  Stucchi series quick couplers and dust caps, on all modular boom quick coupling oil system, for fast, no oil spill, easy installation and removal of boom.
•  Integrated transport stand for the boom during transport.
•  Stick end, downsized to a Cat 330 size, DB series linkage.
•  In the Manufacture of this boom, Automated machine welded joints were performed where accessible. The quality of this package is second to none.
•  Full Q690D Grade Steel was speced Throughout for this boom construction. This is 100,076 PSI steel. This steel is 30% higher priced than the Q345B grade 70,000 PSI steel that is used in most of these Long and High Reach booms in the industry.
•  High OEM Quality steel hydraulic plumping lines, with extra heavy clamps used throughout boom.
•  Highest quality dimpled brass bushings used throughout the boom joints.
•  Steel Grease line plumbing to all joints.
•  Boom Weight – 22,000 Pounds
•  Boom Rated for 5,500 pound work tool.
•  Primed and painted with high quality urethane.

Hydraulic Tilt Cab, information
•  Full electric over Hydraulic tilt cab platform.
•  Full Front guarding
•  Integrated step
•  Easy and Fast Up/Down Controls.

Auxiliary Counterweight, Information.
•  12,000 pound auxiliary center section counterweight added to machine.
•  Carefully designed to maintain the existing body lines. Easy on / off if needed.
•  Rear counterweight removes same as factory intended.

 

Priced as Option #1, A02765, 2014 Caterpillar MP324 Multi Processor, information.
•  Available to be bought with machine at additional cost.
•  This unit is low hour, very clean condition
•  No oil leakage
•  Includes 3 factory jaw sets in total, listed below.
A02766, Shear Jaw Set, part # 417-0589
A02767, Pulverizer Jaw Set, part # 388-0000
A02768, Demolition Jaw Set, part # 397-9681
•  Total Processor tool and jaw set list price over $200,000 New
•  Sale price – Cat MP324 processor with 3 jaw sets – $100,000, in addition to machine price.

Priced as Option #2, Stock, Boom, Stick, and Bucket, information.
•  Available to be bought with machine at additional cost.
•  Heavy Duty Standard Reach Boom
•  Stick length is 12’6”
•  Bucket is 74”
•  All pictures provided if needed.
•  Sale price – Stock Boom, Stick, Bucket – $25,000, in addition to machine price.

Priced as Option #3, A02847, 2015 Caterpillar MP318 Multi Processor, information.
• Available to be bought with machine at additional cost.
• This unit is low hour, very clean condition
• No oil leakage
• Includes 1 factory jaw set in total
Sale price – Cat MP318 processor with 1 jaw set – $78,000, in addition to machine price.

We started this conversion, with a really clean dirt machine. the machine excellent condition. We have performed extensive work order, servicing, and testing on machine. all work order documents available to email. The package is of superior quality, and ready to go.

We invite your own personal, or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa.

Nationwide Delivery, Export, and Financing available at very good rates. Call Josh @ 563-872-4112 or email Sales@jjscheckel.com

Price: $458,000

Print Friendly, PDF & Email